How much does PULSAR 3K cost? (price)

PULSAR 3K is priced individually — the price depends on the configuration (variant, length, colors, control) and order size. As the manufacturer we offer B2B terms for upfitters and fleets; a quote is usually ready the same business day. Ask via the form or by phone: +48 518 909 088.

Where can I find the PULSAR 3K datasheet?

We send the datasheet of your chosen configuration by e-mail on request — write to sales@emertronic.pl. The basic technical data is in the table above, and the full 2026 product catalog downloads without registration in the Downloads section.

What type approvals does PULSAR 3K hold?

PULSAR 3K: ECE R65 Cl. 2, ECE R10, E20 (UNECE E20 65R TA2/TB2/TR2 · UNECE E20 10R-06). Testing is carried out in Poland, and certification covers every operating mode — not just the base variant.

Will I get an installation manual for PULSAR 3K?

Yes — the installation and wiring manual ships with the product, and on upfitter orders we support the first installation and train the team. Tender documentation (declarations, type approvals) is compiled on request.

Beacons · Part No. EM-PL-360-3K

PULSAR 3KLED beacon — tri-color version

Name: PULSAR 3K
Brand: Emertronic
SKU: EM-PL-360-3K

One lamp. Three colors. 360°.

The flagship 360° beacon: 36 High-Power LEDs, 12 per each of three certified colors, and three mounting systems — including a PIMOT-tested NdFeB magnetic mount. An emergency vehicle and roadworks protection with the same equipment.

ECE R65 Cl. 2ECE R10E20

UNECE E20 65R TA2/TB2/TR2 · UNECE E20 10R-06

1018 km/hmagnetic-mount separation from a dry roof (PIMOT test, 210 N)

Ask about this product PDF catalog

PULSAR 3K — about the product

PULSAR 3K is Emertronic's flagship beacon — 36 High-Power LEDs, 12 per each of three certified colors, in one low-profile 360° housing. An emergency vehicle today, roadworks protection tomorrow, always the same equipment on the roof.

Three certified colors (ECE R65 in the top class 2) switched by task turn one beacon into signaling for many services and scenarios, and dedicated optics deliver the highest light output the regulations allow. The automatic day/night mode keeps the signal legible in full sunlight and glare-free at night, and the design does not interfere with radio communications.

Three mounting systems — 3-point (M6/M5), magnetic (NdFeB, tool-free) and 1-point (M12 bolt) — with the magnetic mount's strength confirmed in the WT/118/PIMOT/19 test: the equivalent of 1018 km/h (210 N) on a dry roof.

Synchronization of up to 10 lamps over one wire and full integration with the EMCORE system; works with the optional ADAPTIVE mode, which matches the light pattern to the situation.

Mounting PULSAR — three ways

The beacon mounts on the vehicle roof with its axis perpendicular to the ground. A rubber element protects the panel from scratching and seals the joint. The choice of mount depends on whether the beacon stays on the roof permanently or is meant to be removable.

A · 3-POINT
3-point mounting
Three points spaced 120° apart: 3× M6 bolted from under the roof, or 3× M5 from above — in the latter variant the lens comes off before installation.
Selection: Permanent installation on flat paneling. The rubber seals the joint, but an additional sealant is used against water ingress.
B · MAGNETIC
Magnetic mounting
A base of high-holding-force neodymium magnets. The rubber element protects the roof and keeps the beacon from sliding on the panel.
Selection: When the beacon is to be removable: tool-free installation, no drilling, on a steel roof. Effectiveness confirmed by the PIMOT test.
C · 1-POINT
1-point mounting
A single central M12 bolt in a dedicated hole, tightened with the nut and washer supplied in the kit.
Selection: When the roof already has a prepared central hole. The rubber seals the joint — additional sealant recommended.

Key features

36× High-Power LED — 12 LEDs per each of three colors
Ultra-compact, low-profile design
No radio-communication interference
Synchronization of up to 10 lamps over one wire
Built-in light sensor — auto day/night
Integration with the EMCORE system
Reverse-polarity protection

Applications

Roof of an emergency vehicle — marked and unmarked (magnet)
Road-maintenance and municipal vehicles (amber)
Integration with the EMCORE system

PULSAR 3K — technical data

Technical specification of PULSAR 3K
Light source	36 High-Power LED (12 per color)
Light coverage	360°
Voltage	12 / 24 V DC
Avg. current draw	0.8 A (12 V) · 0.4 A (24 V)
Average power	15 W
Signal colors	TB2 · TR2 · TA2 · white · green
Flash modes	Quad / Single / Double / Triple / Night
Operating temperature	−40 → +60 °C
Dimensions	ø 150 × h 50 mm (magnetic h 55 mm)
Synchronization	up to 10 devices
Mounting	3-point (M6/M5) · NdFeB magnetic · 1-point (M12)

Magnetic-mount test — WT/118/PIMOT/19

Magnetic-mount test — WT/118/PIMOT/19
Road test	Requirement	Result
Acceleration to 140 km/h	No displacement of the test object	No displacement
Emergency braking from 140 km/h	No displacement under maximum-effectiveness braking	No displacement
R = 50 m curve at 60 km/h	No displacement on a 50 m radius curve	No displacement
Lane change at 60 km/h	No displacement during the maneuver	No displacement
Cobblestones, 40 km/h, 3 km stretch	No displacement on a cobbled surface	No displacement
Separation — dry roof	—	1018 km/h (210 N starting force)
Separation — wet roof	—	544 km/h (60 N starting force)

PULSAR 3K — questions and answers

PULSAR 3K is priced individually — the price depends on the configuration (variant, length, colors, control) and order size. As the manufacturer we offer B2B terms for upfitters and fleets; a quote is usually ready the same business day. Ask via the form or by phone: +48 518 909 088.

PULSAR 3KLED beacon — tri-color version

PULSAR 3K — about the product

Mounting PULSAR — three ways

3-point mounting

Magnetic mounting

1-point mounting

Key features

Applications

PULSAR 3K — technical data

Magnetic-mount test — WT/118/PIMOT/19

PULSAR 3K — questions and answers

From the same ecosystem

PULSAR 1K

PULSAR 2K

Ask about PULSAR 3K.