Emertronic — a Polish manufacturer of warning systems
PULSAR 2K — product photo

Beacons · Part No. EM-PL-360-2K

PULSAR 2KLED beacon — dual-color version

Two colors. One lamp. 360°.

A 360° dual-color beacon: 24 High-Power LEDs, 12 per each of two certified colors in one housing, with an automatic day/night mode. The vehicle changes duties without changing its lighting.

ECE R65 Cl. 2ECE R10E20

UNECE E20 65R TA2/TB2/TR2 · UNECE E20 10R-06

1018 km/hmagnetic-mount separation from a dry roof (PIMOT test, 210 N)

PULSAR 2K — about the product

PULSAR 2K was designed for vehicles that change duties more often than lighting: two certified colors in one 360° beacon mean one mounting position instead of two lamps — and a fleet ready for more than one mission.

Mounting PULSAR — three ways

The beacon mounts on the vehicle roof with its axis perpendicular to the ground. A rubber element protects the panel from scratching and seals the joint. The choice of mount depends on whether the beacon stays on the roof permanently or is meant to be removable.

  • 3-point mounting (A · 3-POINT) — module photo
    A · 3-POINT

    3-point mounting

    Three points spaced 120° apart: 3× M6 bolted from under the roof, or 3× M5 from above — in the latter variant the lens comes off before installation.

    Selection: Permanent installation on flat paneling. The rubber seals the joint, but an additional sealant is used against water ingress.

  • Magnetic mounting (B · MAGNETIC) — module photo
    B · MAGNETIC

    Magnetic mounting

    A base of high-holding-force neodymium magnets. The rubber element protects the roof and keeps the beacon from sliding on the panel.

    Selection: When the beacon is to be removable: tool-free installation, no drilling, on a steel roof. Effectiveness confirmed by the PIMOT test.

  • 1-point mounting (C · 1-POINT) — module photo
    C · 1-POINT

    1-point mounting

    A single central M12 bolt in a dedicated hole, tightened with the nut and washer supplied in the kit.

    Selection: When the roof already has a prepared central hole. The rubber seals the joint — additional sealant recommended.

Key features

  • 24× High-Power LED — 12 LEDs per each of two colors
  • Ultra-compact, low-profile design
  • No radio-communication interference
  • Synchronization of up to 10 lamps over one wire
  • Built-in light sensor — auto day/night
  • Integration with the EMCORE system
  • Reverse-polarity protection

Applications

  • Roof of an emergency vehicle — marked and unmarked (magnet)
  • Road-maintenance and municipal vehicles (amber)
  • Integration with the EMCORE system

Variants and options

  • Dual Blue/Amber (TB2-T)
  • Dual Blue/Red
  • Dual Red/Amber

PULSAR 2K — technical data

Technical specification of PULSAR 2K
Light source24 High-Power LED (12 per color)
Light coverage360°
Voltage12 / 24 V DC
Avg. current draw0.8 A (12 V) · 0.4 A (24 V)
Average power15 W
Signal colorsTB2 · TR2 · TA2 · white · green
Flash modesQuad / Single / Double / Triple / Night
Operating temperature−40 → +60 °C
Dimensionsø 150 × h 50 mm (magnetic h 55 mm)
Synchronizationup to 10 devices
Mounting3-point (M6/M5) · NdFeB magnetic · 1-point (M12)

Magnetic-mount test — WT/118/PIMOT/19

Magnetic-mount test — WT/118/PIMOT/19
Road testRequirementResult
Acceleration to 140 km/hNo displacement of the test objectNo displacement
Emergency braking from 140 km/hNo displacement under maximum-effectiveness brakingNo displacement
R = 50 m curve at 60 km/hNo displacement on a 50 m radius curveNo displacement
Lane change at 60 km/hNo displacement during the maneuverNo displacement
Cobblestones, 40 km/h, 3 km stretchNo displacement on a cobbled surfaceNo displacement
Separation — dry roof1018 km/h (210 N starting force)
Separation — wet roof544 km/h (60 N starting force)

PULSAR 2K — questions and answers

  • PULSAR 2K is priced individually — the price depends on the configuration (variant, length, colors, control) and order size. As the manufacturer we offer B2B terms for upfitters and fleets; a quote is usually ready the same business day. Ask via the form or by phone: +48 518 909 088.

Ask about PULSAR 2K.

We reply during office hours: Mon–Fri 7:00–15:00 (CET). Configuration and pricing with no obligation.

Request a quote+48 518 909 088Mon–Fri 7:00–15:00 (CET)